TM10-3930-660-20 8-41. BACK-UP ALARM SWITCH - REPLACE/ADJUST (Cont’d) 3. SECURE LEVER HOUSING (1) TO CONSOLE (2) . a. b. c. d. e. Position lever housing (1) inside console  (2). Lower panel (6) to console (2). Position panel (8) on panel (6). Secure panel (8), and lever housing (l), to panel (6) with four  capscrews  (7). Secure panel (6) to console (2) with four capscrews (5). Install knobs (3) on shift levers (4). ADJUSTMENT Back-up alarm switch (9) should be adjusted so that back-up alarm sounds only when travel select lever is in REVERSE   position. 1. TURN IGNITION SWITCH TO THE “ON” POSITION, BUT DO NOT START ENGINE. Be sure blackout lights are switched OFF  . 2. 3. 4. LOOSEN NUT (12). MOVE BACK-UP ALARM SWITCH (9) UP OR DOWN AS REQUIRED SO THAT BACK-UP ALARM ONLY SOUNDS WHEN TRAVEL SELECT LEVER IS IN “REVERSE” POSITION. TIGHTEN NUT (12). 8-105