TM10-3930-660-20 8-35. REAR TURN SIGNAL  LIGHTS   -  REPAIR/REPLACB This task covers: a.   Removal b. Installation c. Repair by bulb replacement Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Lockwashers  (11) Loctite 242 (App. C, Item 39) Equipment  Condition Starwashers  (9) Vehicle parked on level ground. Tie Wrap (1) (App. C, Item 53) Negative battery cable removed, para.  8-44. Removal 1. DISCONNECT ELECTRICAL LEADS AT REAR TURN SIGNAL LIGHT. a. Remove and discard tie wrap (l). b. Tag and disconnect male plug (2) from female plug (3) connecting electrical lead (4) from vehicle wiring harness to rear turn signal light  assembly  (5). One wire lead (6) disconnected in step “b” below is part of the rear turn signal light assembly (5). The other wire lead (7) is part of the vehicle wiring harness. c. Remove capscrew (8) and starwasher (9) . Tag and disconnect two wire leads (6) and (7). Remove second starwasher  (9). Discard two starwashers  (9). 2. REMOVE MOUNTING HARDWARE, LENS, AND SOCKET PLATE ASSEMBLY. a. Remove two nuts (10), and two lockwashers  (11). Discard two  lockwashers  (11). 8-92