TM10-3930-660-20 8-34. LIGHTS -  REAR  COMPOSITE  BLACKOUT/TML/STOP  -  REPLACE/REPAIR FRONT COMPOSITE BLACKOUT/TURN SIGNAL/PARKING - REPLACE/REPAIR (Cont’d) 2. CONNECT ELECTRICAL LEADS AT PLUGS. a. b. Connect male and female connector plugs (2) and (3) at rear of light assembly (4) as tagged. Install new tie wrap (l). 3. CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. 2. 3. 4. 5. CAREFULLY PUSH AND TWIST OLD BULB (13) COUNTERCLOCKWISE UNTIL IT RELEASES FROM SOCKET. REMOVE AND DISCARD OLD BULB (13). CAREFULLY PUSH AND TWIST NEW BULB (13) INTO SOCKET UNTIL IT LOCKS INTO PLACE  . ALIGN LENS (12) ON LIGHT ASSEMBLY (4) AND TIGHTEN FIVE SCREWS (11). CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. REPAIR BY BULB REPLACEMENT 1. LOOSEN FIVE SCREWS (11) AND REMOVE LENS (12) FRON LIGHT ASSEMBLY (4). All bulbs used in the light assemblies covered in this paragraph are removed and installed as described in steps 2 and 3, below. 8-91