TM10-3930-660-20 8-34. LIGHTS   - REAR COMPOSITE BLACKOUT/TAIL/STOP - RBPLACE/REPAIR FRONT COMPOSITE BLACKOUT/TURN SIGNAL/PARKING - REPLACE/REPAIR (Cont’d) 2. REMOVE MOUNTING HARDWARE, GROUND LEADS , AND LIGHT ASSEMBLY. a. b. c. On front light assemblies, remove capscrew (5), starwasher (6), one wire lead (7), and starwasher (6). Discard two starwashers (6). On rear light assemblies, remove capscrew (5), starwasher (6), two wire leads (7) , and starwasher (6). Discard two starwashers (6). Support light assembly (4) so it does not drop. Remove  capscrew (8), starwasher (9) and light assembly (4) from light bracket (10). Discard starwasher (9). INSTALLATION 1. INSTALL LIGHT ASSBMBLY, GROUND LEADS, AND MOUNTING HARDWARE. Apply Loctite 242 to capscrews (5) and (8) as installed. a. b. c. Align light assembly (4) with holes on light bracket (10). Secure with new starwasher (9) and capscrew  (8). On front light assemblies, install new starwasher (6), one wire lead (7), new starwasher (6) and capscrew  (5). On rear light assemblies, install starwasher (6), two wire leads (7), new starwasher (6) and capscrew (5). 8-90