TM10-3930-660-20 8-34. LIGHTS -  REAR  COUPOSITE  BLACKOUT/TAIL/STOP  -  REPLACE/REPAIR FRONT COUPOSITE BLACKOUT- SIGNAL/PARKING - REPLACE/REPAIR This task covers: a. Removal b. Installation c. Repair by bulb replacement Initial  Setup Tools Tool Kit, Automotive Mechanics Materials/Parts Loctite 242 (App. C, Item 39) Starwasher  (6) Equipment  Condition Starwasher  (9) Vehicle parked on level ground. Tie Wrap (1) (App. C, Item 53) Negative battery cable removed, para.  8-44. Removal, installation, and repair procedures are essentially similar for the rear composite blackout/tail/stop lights (a) and the front composite blackout/turn signal/parking lights (b). The  rear  composite  blackout/tail/stop lights (a) have four bulbs and four female connector plugs. The front composite blackout/turn signal/parking lights (b) have three bulbs and three female connector plugs. REM0VAL 1. DISCONNECT AT a. b. PLUGS  . ELECTRICAL  LEADS Remove and discard tie wrap (l). Tag and disconnect male and female connector plugs (2) and (3) at rear of light assembly (4). 8-89