TM10-3930-660-20 8-32. FLOODLIGHTS  AND  SPOTLIGHTS   - REPLACE/REPAIR (Cont’d) REPAIR BY BULB REPLACEMENT OF CAB SPOTLIGHTS 1. 2. 3. 4. 5. 6. 7. REMOVE SCREW (g) FROM RETAINING RING (h). SEPARATE RETAINING RING (h) AND SEALED BEAM BULB (20) AS AN ASSEMBLY FROM SPOTLIGHT (2). UNPLUG SEALED BEAM BULB (20) FROM SPOTLIGHT (2) . REMOVE FOUR SPRING CLIPS (i) SECURING SEALED BEAM BULB (20) TO RETAINING RING (h). REMOVE AND DISCARD OLD BULB (20) . PLACE NEW SEALED BEAM BULB (20) IN RETAINING RING (h) AND SECURE WITH FOUR SPRING CLIPS (i). PLUG SEALED BEAM BULB (20) INTO SPOTLIGHT  (2). PLACE RETAINING RING (h) AND SEALED BEAM BULB (20) ON SPOTLIGHT (2) AS AN ASSEMBLY. SECURE RETAINING RING (h) TO SPOTLIGHT (2) WITH SCREW (g). CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. 8-86