TM10-3930-660-20 8-32. FLO0DLIGHT'S  AND  SPOTLIGHTS  -  REPLACE/REPAIR (Cont’ d) TO prevent  personal  injury accidental glass breakage, of heavy leather gloves or from wear a pair other suitable hand protection when replacing sealed beam  bulbs. REPAIR By BULB REPLACEMENT  OF  FLOODLIGHTS 1. 2. 3. 4. 5. 6. USING TWO SCREWDRIVERS, CAREFULLY PRY FLEXIBLE HOUSING OF FLOODLIGHT ASSEMBLY (1) FROM AROUND OLD SEALED BEAM BULB (19) UNTIL BULB (19) IS FREE OF  HOUSING. UNPLUG SEALED BEAM BULB (19) FROM FLOODLIGHT ASSEMBLY (1). DISCARD OLD BULB  (19). PLUG NEW SEALED BEAM BULB (19) INTO FLOODLIGHT ASSEMBLY (1). MOISTEN EDGES OF SEALED BEAM BULB (19) AND HOUSING OF FLOODLIGHT ASSEMBLY (1) WITH SOAP AND WATER SOLUTION. POSITION SEALED BEAM BULB (19) SO THAT NOTCH (f) OF BULB (19) IS ORIENTED AS SHOWN. CAREFULLY PRESS BULB (19) INTO HOUSING OF FLOODLIGHT ASSEMBLY (1) UNTIL BULB (19) IS SEATED IN PLACE. CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. 8-85