| |
TM10-3930-660-20
8-32.
FLOODLIGHTS AND SPOTLIGHTS - REPLACE/REPAIR (Contd)
REMOVAL OF CAB SPOTLIGHTS
1.
2.
3.
DISCONNECT MALE PLUG (9) OF SPOTLIGHT
ELECTRICAL LEAD (10 ) FROM FEMALE PLUG
(11) OF VEHICLE WIRING HARNESS (12) l
LOOSEN MOUNTING HARDWARE AND REMOVE
SPOTLIGHT (2).
a.
b.
c.
IF
From outside cab, loosen setscrew
(a) on bracket (13). Loosen
setscrew (b) on spotlight (2).
From inside cab, loosen bolt (c),
and pull handle (d) of spotlight
(2) off shaft (e).
Remove spotlight (2) with shaft
(e) from outside of cab as an
assembly.
NECESSARY, REMOVE LIGHT BRACKET
(13) AND MOUNTING HARDWARE.
a. From inside cab, remove two nuts
(14), lockwashers (15), and
flatwashers (16). Discard
lockwashers (15). Loosen and remove
retainer (17).
b. From outside cab, remove two screws
(18) and bracket (13).
INSTALLATION OF CAB SPOTLIGHTS
1. IF REMOVED, INSTALL LIGHT BRACKET
(13) AND MOUNTING HARDWARE.
Apply
(18).
a.
b.
Loctite 242 to threads of
Position bracket (13) and
screws (18) on outside of
screws
two
cab.
From inside cab, secure bracket
(13) with two flatwashers (16), two
new lockwashers (15) and two nuts
(14). Install and tighten retainer
(17).
8-83
|