TM10-3930-660-20 8-31. STE/ICE SHUNT  -  REPLACE  (Cont’d) 2. REMOVE TWO STE/ICE ELECTRICAL WIRES (10) AND (11) FROM STE/ICE SHUNT (3). a. Remove screw (12), lockwasher (13), flatwasher (14) and STE/ICE electrical lead (10) from terminal (15) of STE/ICE shunt (3). Tag and remove electrical lead (10) from  terminal  (15). b. Remove screw (16), lockwasher (17), flatwasher (18) and STE/ICE electrical lead (11) from terminal (19) of STE/ICE shunt (3). Tag and remove electrical lead (11) from  terminal  (19). 3. REMOVE TWO CAPSCREWS (20), TWO LOCKWASHERS (21), AND TWO NUTS (22) SECURING STE/ICE SHUNT (3) TO BATTERY BOX (23). REMOVE STE/ICE SHUNT (3) FROM BATTERY BOX (23). DISCARD LOCKWASHERS (21). INSTALLATION Apply Loctite 242 to capscrews (20) as installed. 1. SUPPORT AND POSITION STE/ICE SHUNT (3) ON BATTERY BOX (23). SECURE STE/ICE SHUNT (3) TO BATTERY BOX (23) WITH TWO CAPSCREWS (20), TWO NEW LOCKWASHERS (21), AND TWO NUTS 2. INSTALL TWO STE/ICE ELECTRICAL (10) AND (11) TO STE/ICE SHUNT a. Position STE/ICE electrical (22) . WIRES (3). lead (11) at terminal (19) of STE/ICE shunt (3). Secure electrical lead (11) to terminal (19) with flatwasher (18), lockwasher (17), and  screw  (16). 8-79