| |
TM10-3930-660-20
8-29.
STB/ICE FUEL FILTER DIFFERENT
IAL PRESSURE SWITCH - REPLACE (Cont’d )
6.
7.
8.
IF NECESSARY, REMOVE TWO SCREWS (11),
TWO LOCKWASHERS (12) , BRACKET (10) ,
AND TWO STARWASHERS (13). DISCARD
LOCKWASHERS (12) AND STARWASHERS (13).
IF NECESSARY, REMOVE HOSE (1), ADAPTER
(14) AND FLUID PASSAGE BOLT (15) FROM
ENGINE.
IF NECESSARY, REMOVE HOSE (2) AT
ADAPTER (16).
INSTALLATION
1. IF REMOVED, INSTALL HOSE (2) AT
ADAPTER (16).
During step 2, apply Loctite 59241 to
threaded end of adapter (14) that screws
into fluid passage bolt (15).
2. IF REMOVED, INSTALL FLUID PASSAGE
(15), ADAPTER (14) AND HOSE (1).
3. IF REMOVED, POSITION BRACKET (10)
ENGINE AND SECURE WITH TWO NEW
STARWASHERS (13), TWO NEW
BOLT
ON
LOCKWASHERS (12), AND TWO SCREWS (11).
During step 4, apply Loctite 59241 to
threaded end of adapter (4) and elbow
(3) that screws into switch (4).
4. IF REMOVED, INSTALL ELBOW (3) AND
ADAPTER (4) TO SWITCH (5).
Position switch (5) on
noted during removal.
POSITION SWITCH (5)
AND SECURE WITH TWO
(9) .
bracket (10) as
ON BRACKET (10)
NEW
INSERT MALE PLUG (6) OF
INTO FEMALE PLUG (7) OF
HARNESS (8).
TIE STRAPS
SWITCH (5)
VEHICLE WIRING
7.
8.
INSTALL TWO FUEL LINES (1) AND (2) TO
ELBOW (3) AND ADAPTER (4) AT SWITCH
(5) AS TAGGED.
CONNECT NEGATIVE BATTERY CABLE,
PARA. 8-44.
8-75
|
