TM10-3930-660-20 8-20. FORK  AUTOLEVELER  CIRCUIT BOARD -  TEST/REPLACE (Cont’d) INSTALLATION 1. IF REMOVED, PLACE CIRCUIT BOARD (1) ON COVER (4) AND SECURE WITH FOUR NEW LOCKNUTS  (16),  AND  FOU CAUTION Support cover (4) during so that weight of cover R SCREWS (15). steps 2 and 3 4) and circuit board (1) is not supported by electrical leads (5). 2. PLACE FOUR ELECTRICAL LEADS (5) ON TERMINAL STRIP (14) OF CIRCUIT BOARD (1) AS TAGGED. SECURE LEADS (5) TO TERMINAL STRIP (14) WITH FOUR SCREWS (15) . 3. SECURE CONNECTOR (10) AND ELECTRICAL CABLE (13) TO BOX (2) WITH FOUR NEW LOCKWASHERS (12) AND FOUR SCREWS (11) l 4. CONNECT PLUG OF AUTOLEVELER CABLE (9) TO CONNECTOR (10) ON BOX (2) AND SECURE WITH COLLAR (8). 5. PLACE COVER (4) ON BOX (2) AND SECURE WITH FOUR SCREWS (3). 6.  CONNECT  BATTERIES,  PARA  8-44. 8-49