TM10-3930-660-20 8-13. TURN SIGNAL SWITCH - REPLACE This task covers: a. Removal b.  Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Loctite 242 (App. C, Item 39) Equipment  Condition Vehicle parked on level ground. Negative battery cable disconnected, para.  8-44. REMOVAL 1. REMOVE TWO SCREWS (l), AND CLAMP (2), SECURING SWITCH (3), TO STEERING COLUMN  (4). 2. DISCONNECT WIRING. a. b. c. Remove screw (5) and access cover (6) . Follow switch cable (7) as it passes through dashboard. Tag and disconnect four male Connecters (a) on cable (7) from four female connectors (b) on vehicle wiring harness (8). 3. REMOVE SWITCH CABLE (7) AND SWITCH (3) AS AN ASSEMBLY. a. b. c. Support turn signal switch (3) so it does not drop during cable (7)  removal. From top of dashboard, pull switch cable (7) through dashboard and remove turn signal switch (3) and cable (7) as an assembly. If necessary, remove grommet (9) at hole (c). 8-30