TM1O-393O-66O-2O 8-6. INSTRUMENT PANELS -  REPLACE  (Cont‘d) 2. SEPARATE RIGHT-HAND INSTRUMENT PANEL (9) FROM FRONT CONSOLE (2). a. Remove four capscrews (10) from right-hand instrument panel (9). b. Separate panel (9) from console (2) by lifting right edge of panel (9) at console (2). If complete removal of one or both instrument panels from vehicle is required, follow steps 3 and 4 below. 3. DISCONNECT ELECTRICAL LEADS FROM COMPONENTS ON INSTRUMENT PANELS (1) AND/OR  (9). REMOVE INSTRUMENT PANELS (1)  AND/OR  (9)  FROM  VEHICLE. a. b. 4. IF Tag and disconnect all electrical leads of vehicle wiring harness from components on instrument panels (1) and/or (9). Refer to paragraphs 8-7 thru 8-11 for component wiring removal instructions. Remove instrument panels (1) and/or (9) from vehicle. NECESSARY,  REMOVE  COMPONENTS  FROM INSTRUMENT PANELS (1) AND/OR (9) AS REQUIRED. If necessary, remove components from instrument panels (1) and/or (9) as required. Note location of components for use during installation. Refer to paragraph 8-7, 8-8, 8-9, 8-10 and 8-11 for component removal instructions. 8-13