TM1O-393O-66O-2O 8-5.   NEUTRAL SAFBTY SWITCH -  INSPECT/REPLACE (Cont’d) 5. 6. PERFORM STEP 3. WITH TRAVEL SELECT LEVER IN THE REVERSE (R) POSITION. IF ENGINE STARTED IN STEP 5, REPLACE REMOVAL NEUTRAL SAFETY SWITCH. The neutral safety switch is located on the right side of the transmission. 1. 2. 3. 4. DISCONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. REMOVE TRANSMISSION COVER, PARA. 16-6 REMOVE two SCREWS (1), Two LOCKWASHERS (2) AND DISCONNECT WIRING (3) FROM NEUTRAL SAFETY SWITCH (4). DISCARD LOCKWASHERS (2). REMOVE NEUTRAL SAFETY SWITCH (4) FROM . THE TRANSMISSION CONTROL VALVE (5). INSTALLATION 1. 2. 3. 4. INSTALL NEUTRAL SAFETY SWITCH (4) INTO THE TRANSMISSION CONTROL VALVE (5). INSTALL TWO SCREWS (1) AND TWO NEW LOCKWASHERS (2) TO CONNECT WIRING (3) TO NEUTRAL SAFETY SWITCH (4). INSTALL TRANSMISSION COVER, PARA.  16-6. CONNECT NEGATIVE BATTERY CAELE, PARA.  8-44. 8-11