TM10-3930-660-20 8-5. NEUTRAL SAFETY SWITCH -   INSPECT/RBPIACE This task covers: a. Inspection b. Removal c. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Lockwashers  (2) Equipment  Condition Vehicle parked on level ground. Reference TM10-3930-660-10 INSPECTION Move vehicle to an open area to perform inspection. Alert personnel to stay away from front and rear of vehicle during inspection. Vehicle may start and move suddenly, possibly causing injury. Make sure wheels are straight performing inspection. See TM10-3930-660-1O for operating  instructions. before vehicle 1. 2. 3. 4. STRAIGHTEN VEHICLE WHEELS AND TURN ENGINE  OFF. PUT THE TRAVEL SELECT LEVER IN THE FORWARD (F) POSITION. WITH PARKING BRAKE ON AND BRAKE PEDAL DEPRESSED, TRY TO START THE ENGINE. TURN ENGINE OFF IMMEDIATELY IF IT STARTS . IF ENGINE STARTED IN STEP 3., REPLACE NEUTRAL SAFETY SWITCH. SEE REMOVAL IN THIS PARAGRAPH, IF ENGINE DID NOT START, GO TO NEXT STEP. 8-10