TM10-3930-6O-20 8-4. STARTING MOTOR - REPLACE (Cont’d) 3. Support starting motor (5) to prevent starting motor from dropping when capscrews (1) are removed. REMOVE STARTING MOTOR (5), AND STARTING MOTOR SOLENOID (9), FROM VEHICLE AS AN ASSEMBLY. a. Remove two capscrews (1). b. Remove starting motor (5), and solenoid  (9). INSTALLATION Support starting motor (5) during installation. 1. 2. INSTALL STARTING MOTOR (5), AND STARTING MOTOR SOLENOID (9). a. b. Position starting motor (5) on engine. Install two capscrews (1). CONNECT LEADS (8), LEADS (7), AND POSITIVE ELECTRICAL CABLE (6), AT STARTING MOTOR SOLENOID (9) AS TAGGED. a. Position two electrical leads (8) on terminal (b) of solenoid (9). Secure with nut (11) and new starwasher  (12). 8-8