TM10-3930-660-20 8-3. ALTERNATOR AND ALTERNATOR PULLEY -  REPLACE  (Cont’d) Be sure drive belt (9) is properly positioned around engine pulleys as noted during  removal.   If necessary, refer to Para. 7-9 for drive belt (9) installation instructions. 5. 6. 7. LIFT FAN BELT TENSIONER ASSEMBLY (10) AND INSTALL FAN BELT (9) ON ALTERNATOR PULLEY (11). CONNECT ELECTRICAL LEADS (1), (2), AND (3) TO ALTERNATOR (4). a. b. Position electrical lead “60” (3), new starwasher (8) , and electrical lead “N” (2) on terminal (b) of alternator (4) and secure with nut (7). Torque nut (7) to between 24 lb. in. and 38 lb. in. Position electrical lead “p” (1), new starwasher (6), and capscrew (5) at terminal (a) of alternator (4) and secure with capscrew (5). Torque capscrew to between 78 and 120 lb. in. CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. 8-6