| |
TM10-3930-660-20
7-11.
WATER INLET -
( C o n t d )
INSTALLATION
Clean hose fittings on engine and
radiator. Scrape all rubber residue from
hose fittings to avoid coolant loss.
1. IF REMOVED, INSTALL TWO PLUGS (7).
2. INSTALL WATER INLET (4).
a. Position new seal (6) and water
inlet (4) on engine.
b. Secure water inlet (4) with three
bolts (5).
3. INSTALL LOWER RADIATOR HOSE (1).
a. Slide ends of lower radiator hose
(1) on water inlet (4) and radiator
(3).
b. Secure lower radiator
two new clamps (2).
4. FILL COOLING SYSTEM WITH
PARA. 7-3.
hose (1) with
COOLANT ,
7-29/(7-30 Blank)
|