TM10-3930-660-20 7-9, DRIVE BBLT AND TENSIONER  - REPLACE (Cont’d) 2. IF a. b. NECESSARY, REMOVE TENSIONER (2). Remove capscrew (8) and tensioner (2) from bracket (9). If necessary, remove two capscrews (10)  and  bracket  (9)  from  engine. INSTALLATION 1. IF a. b. c. REMOVED, INSTALL TENSIONER (2). If removed, secure bracket (9) to engine with two capscrews (10). Torque capscrews to 216 lb. in. Align mounting hole on tensioner (2) with lower mounting hole on bracket  (9). Secure tensioner (2) to bracket (9) with capscrew (8). Torque capscrew (8) to 32 lb. ft. 2. INSTALL DRIVE BELT (1). a. Position belt (1) around blades of fan (7). b. Place belt (1) on crankshaft pulley (5), fan pulley (4), and water pump pulley (6). c. Lift tensioner (2) and place belt (1) on alternator pulley (3) and under tensioner (2). Lower tensioner assembly (2). 3. INSTALL FAN GUARDS, PARA. 7-8. 7-25