| |
TM10-3930-660-20
7-9.
DRIVE BELT AND TENSIONER - REPLACB
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Tool Kit, Automotive Mechanics
Shop Equipment, Automotive
Maintenancet Common #2 Less Power
Equipment Condition
Vehicle parked on level ground.
Engine cool.
Fan guards removed, Para. 7-8.
Drive belt deflection when measured
midway between longest span of belt
should be no greater than 1/2 inch. If
deflection is greater than 1/2 inch,
replace belt.
Drive belt tension is not
adjustable.
1. REMOVE DRIVE BELT (l).
a.
b.
c.
Lift tensioner (2).
Remove belt (1) from alternator
pulley (3), fan pulley (4),
crankshaft pulley (5), and water
pump pulley (6).
Position belt (1) around blades of
fan (7) and remove from vehicle.
7-24
|
