TM10-3930-660-20 7-6. WATER PUMP - REPLACE This task covers: a. Removal b. Installation Initial Setup Tools Materials  Needed Tool Kit, Automotive Mechanics Gasket (4) Shop Equipment, Automotive Maintenance, Common #2 Less Power Equipment  Condition Vehicle parked on level ground. Engine off and cool. Coolant drained, para. 7-3. Left-hand fan guard removed, para. 7-8. Fan drive belt removed, para. 7-9. 1. REMOVE TWO CAPSCREWS (1) HOLDING WATER PUMP (2) TO ENGINE (3) 2. REMOVE WATER PUMP (2) AND GASKET (4). DISCARD GASKET (4). INSTALLATION 1. 2. 3. 4. 5. 6. CLEAN SEALING SURFACE ON ENGINE (3) WHERE WATER PUMP (2) ATTACHES TO ENGINE  (3). INSTALL NEW GASKET (4) INTO GROOVE ON PUMP (2). INSTALL PUMP (2) USING TWO CAPSCREWS (1). TIGHTEN CAPSCREWS TO 216 IN. LBS. INSTALL FAN DRIVE BELT, PARA. 7^-9. INSTALL LEFT-HAND FAN GUARD, PARA. 7-8. FILL RADIATOR WITH COOLANT, PARA.  7-3. 7-19