TM10-3930-660-20 7-5. RADIATOR HOSES -   REPLACE/INSPBCT (Cont’d) c. d. e. f. g. h. Slide other end of hose (1) on upper radiator fitting. Position one clamp (2) at each end of hose (1) and tighten clamps  (2). Slide one end of lower radiator hose (3) on lower radiator fitting. Open two new hose clamps (4) and slide them on hose (3). Slide other end of hose (3) on engine water inlet. Position one clamp (4) at each end of hose (3) and tighten clamps  (4). 2. FILL ENGINE WITH COOLANT, PARA. 7-3. INSPECTION 1. 2. 3. INSPECT UPPER (1) AND LOWER (3) RADIATOR HOSES FOR CRACKS AND CUTS. USE MIRRROR AND FLASHLIGHT TO SEE BACKSIDE OF HOSES. SQUEEZE HOSES (1)  AND (3) TO CHECK FOR  SOFT  SPOTS. IF NECESSARY, REPLACE HOSES (1) AND (3). SEE REMOVAL AND INSTALLATION SECTIONS OF THIS PARAGRAPH. 7-18