TM10-3930-660-20 7-4. THERMOSTAT AND WATER OUTLET -  REPLACE  (Cont’d) 2. 3. 4. 5. 6. b. c . Position water outlet (3), thermostat (9), new gasket (10), and lifting bracket (11), on engine. Install two bolts (12) and one capscrew (13) to water outlet (3). Tighten bolts (12) and capscrew (13) to 216 lb. in. POSITION HOSE (8) ON WATER SECURE WITH NEW CLAMP (7). INSTALL ALTERNATOR SUPPORT OUTLET  (3). (2) To WATER OUTLET (3) AND INSTALL ALTERNATOR  (1) TO SUPPORT  (2). a. Position support (2) on water outlet (3) and secure with three capscrews  (6). Torque  capscrews (6) to 216 lb.in. b. Align alternator (1) with support (2) . co Secure alternator (1) to support (2) with capscrew (4) and nut (5). INSTALL DRIVE BELT TO ALTERNATOR PULLEY, PARA. 7-9. CONNECT NEGATIVE BATTERY  CABLE,  PARA. 8-44. FILL ENGINE COOLING SYSTEM WITH COOLANT, PARA. 7-3. 7-16