TM1O-393O-66O-2O 7-4. THERMOSTAT AND WATER OUTLET -   REPLACE  (Cont’d) 2. REMOVE CLAMP (7) AND HOSE (8) FROM WATER OUTLET (3) . DISCARD  CLAMP (7) l Note position of thermostat (9) and gasket (10) in water outlet (3) for use during installation. 3. REMOVE WATER OUTLET (3), THERMOSTAT (9), GASKET (10), AND LIFTING BRACKET (11)  FROM  ENGINE  . a. b. Remove two bolts (12) and one capscrew (13) from thermostat housing  (3). Remove water outlet (3), thermostat (9),  gasket  (10),  and  lifting bracket (11) from engine. Discard gasket  (10). INSTALLATION CAUTION Make sure thermostat (9) and gasket (10) are properly positioned as noted during removal to avoid coolant leaks and thermostat   malfunction. Clean all sealing surfaces thoroughly before installing thermostat (9), new gasket (10) and water outlet (3). 1. INSTALL WATER OUTLET (3), THERMOSTAT (9), NEW GASKET (10), AND LIFTING BRACKET (11) TO ENGINE. a. Position thermostat (9), in water outlet (3), with pin (a) in notch (b) and tang (c) in slot (d). 7-15