TM  10-3930-660-20 5-21. ACCELERATOR CABLE -   RBPLACE/ADJUST (Cont’d) 3. INSTALL ACCELERATOR CABLE (1) AT ACCELERATOR PEDAL (2) FROM UNDER CAB. a. b. c. d. Secure clevis (5) of cable (1) to linkage (6) of pedal (2) with clevis pin (4) and spring clip (3) l Install spring (7) to linkage (6). Position cable (1) on pedal (2). Secure cable (1) to pedal (2) with two new locknuts (8), two flatwashers (9), and cable clamp (lo) . 4. CHECK ADJUSTMENT OF ACCELERATOR CABLE (1)  AND  ADJUST,  IF  NECESSARY.  REFER TO "ADJUST" SECTION OF THIS PARAGRAPH . 5-46