| |
TM10-3930-660-20
5-14.
FUEL SUPPLY LINES
- REPLACE (Cent ‘d)
2. INSTALL SUPPLY LINE (l).
a. Place two new sealing washers (10)
at end of line (1). Position line
(1) on engine and pump (3).
b. Install adapter (7), tee (8), and
fluid passage bolt (9) as an
assembly. Apply Loctite 59241
teflon sealant to sender (5) and
install sender (5) to tee (8).
c. Connect hose (6) to adapter (7).
d. Connect female plug of vehicle
wiring harness (4) to male plug of
fuel pressure sender (5) as
tagged.
e. Tighten nut (2) on line (1) at
pump (3).
5-32
|
