TM10-3930-660-20 5-11. FUEL STRAINER ASSEMBLY   -  SERVICE/REPLACE This task covers: a. Service b. Removal c.   Installation Initial Setup Tools Tool Kit, Automotive Mechanics Materials/Parts Gasket  (7) Lockwashers  (6) Equipment  Condition Fuel drained from fuel/hydraulic tank, para. 5-10. SERVICE 1. 2. 3. REMOVE FUEL STRAINER ASSEMBLY (1) AS DESCRIBED IN “REMOVAL”, BELOW. REMOVE FUEL SEDIMENT AND FOREIGN MATTER FROM FUEL STRAINER ASSEMBLY. INSTALL FUEL STRAINER ASSEMBLY (1) AS DESCRIBED IN “INSTALLATION”, BELOW. REMOVAL 1. 2. 3. 4. REMOVE FUEL CAP (2). REMOVE THREE SCREWS (3) HOLDING STRAINER ASSEMBLY (1) IN NECK (4). LIFT STRAINER ASSEMBLY (1) FROM NECK (4)  . IF NECESSARY, REMOVE THREE NUTS (5), THREE LOCKWASHERS (6), NECK (4), AND GASKET (7). DISCARD LOCKWASHERS (6) AND GASKET (7). INSTALLATION 1. 2. IF NECESSARY, INSTALL NEW GASKET (7), NECK (4), THREE NEW LOCKWASHERS (6), AND THREE NUTS (5). LOWER STRAINER ASSEMBLY (1) INTO TANK (8) THROUGH NECK (4). 3. 4. 5. SECURE STRAINER  ASSEMBLY THREE SCREWS (3). (1) WITH SCREW FUEL CAP (2) ONTO NECK (4). FILL FUEL/HYDRAULIC TANK WITH FUEL, PARA.  5-10. 5-24