| |
TM10-3930-660-20
5-7.
TURBOCHARGER ASSMBLY - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Materials
Tool Kit, Automotive Mechanics
Engine Oil, 3 oz. (App. C, Item 26)
Gasket (3)
Shop Equipment, Automotive
Maintenancer Common #2 Less Power
Equipment Condition
Vehicle parked on level ground.
Engine cool.
Turbocharger air lines removed,
para. 5-8.
Turbocharger oil lines removed,
para. 5-9.
1. REMOVE
2. REMOVE
3. REMOVE
(3).
FOUR HEX NUTS (1).
TURBOCHARGER (2).
AND DISCARD TURBOCHARGER GASKET
CAUTION
If the turbocharger (2) is not to be
installed immediately, cover the opening
in manifold (4).
Failure to do so may
cause engine damage.
INSTALLATION
1.
2.
3.
A
INSTALL NEW TURBOCHARGER GASKET (3).
POSITION TURBOCHARGER (2) ON MANIFOLD
(4) AND SECURE WITH FOUR HEX NUTS (1).
TORQUE NUTS (1) TO 24 LB. FT.
INSTALL TURBOCHARGER OIL DRAIN LINE,
PARA. 5-9.
CAUTION
new turbocharger (2) must be
prelubricated before being operated.
Failure to do so may cause damage to the
turbocharger (2).
4.
5.
6.
POUR TWO TO THREE OUNCES OF ENGINE
OIL INTO FEMALE FITTING LOCATED ON
TOP OF TURBOCHARGER (2). ROTATE
TURBOCHARGER (2) By HAND TO ALLOW OIL
TO ENTER TuRBOCHARGER (2).
INSTALL TURBOCHARGER OIL SUPPLY LINE,
PARA 5-9.
INSTALL TURBOCHARGER AIR LINES, PARA.
5-8.
5-15
|
