| |
TM10-3930-660-20
4-6.
ENGINE OIL LEVEL GAGE - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Tool Kit, Automotive Mechanics
Materials/Parts
Loctite 277 (App. C, Item 41)
Equipment Condition
Vehicle parked on level ground.
Engine off and cool.
Engine oil drained, para. 4-3.
The
and
the
NOTE
engine oil level gage (dipstick
dipstick tube) is accessed through
right-hand engine access door.
1. REMOVE DIPSTICK (1) FROM DIPSTICK
TUBE (2).
2. PULL AND REMOVE DIPSTICK TUBE (2)
FROM ENGINE (3).
If dipstick tube (2) cannot be removed
using this procedure, oil pan must be
removed and dipstick tube (2) must be
pressed out of engine block. Notify
Direct Support Maintenance.
INSTALLATION
1. APPLY LOCTITE 277 TO MOUNTING SURFACE
OF DIPSTICK TUBE (2).
2. INSTALL DIPSTICK TUBE (2) IN ENGINE
(3) .
3. INSERT DIPSTICK (1) IN DIPSTICK TUBE
(2) .
4-9
|
