TM10-3930-660-20 4-5. ROCKER LEVER COVERS   - REPLACE  (Cont’d) 3. IF NECESSARY, REMOVE CAP (7) AND SEAL (8) FROM COVER (6). INSTALLATION 1. IF REMOVED, INSTALL SEAL (8) AND CAP (7) TO COVER (6). Cover (6) is located furthest away from the fan side of the engine. 2. INSTALL COVER (6) AND NEW GASKET (2) TO  ENGINE  (3). a. Place new gasket (2) and cover (6) on engine  (3). b. Secure cover (6) with new O-ring (5) and capscrew (4). Torque caPscrew (4) to 216 in. lb. of torque. 3. INSTALL FIVE COVERS (1) AND FIVE NEW GASKETS (2) TO ENGINE (3). a.   Place five new gaskets (2) and covers (1) on engine (3). b. Secure covers (1) with five new O-rings (5) and capscrews (4). Torque capscrews (4) to 216 in. lb. of torque. 4-8