TM 10-3930-659-34 Section 1I.  MANUFACTURING INSTRUCTIONS (Con’t) 1. 11.75 in.  Diameter Sheet Metal Plate 4. 9.00 in.  Diameter Sheet Metal Plate 2. 1/4 in.  Hex Nut 5. 0.25 in.  x 2.00 in.  Full Threaded Rod 3. 2.50 in.  I.D.  x 4.25 in.  Long Pipe 1. Make from sheet metal NSN 9515-00-204-4602, Part Number MS14465H011; metallic pipe NSN 4710-00-027-7474, Part Number B241-69; screw NSN 5305-00-071-2233, Part Number MS90725-18; and hex nut NSN 5310-00-761- 6882, Part Number MS15967. 2. Cut hole in sheet metal plates to match pipe. 3. Cut off screw head so that stud length is 2 in.  (5 mm). 4. Weld as illustrated. Figure C-6.  Air Deflector Plate. TA708033 C-5