| |
TM 10-3930-659-34
Section II. MANUFACTURING INSTRUCTIONS (Con’t)
1.
0.75 in. Thick
7.
2.50 in. Diameter
2.
0.75 in. Thick
8.
2.75 in. Diameter
3.
0.75 in. Thick
9.
0.38 in. Diameter (11 Places,
4.
1.50 in. Diameter Hole
Equally Spaced)
5.
6.50 in.
10. 1.00 in.
6.
6.50 in.
1.
Make holding fixture from either hardwood or aluminum.
2.
Depending on material used, weld, glue, or nail together upper plate, spacer blocks, and lower plate.
Figure C-3. Turbocharger Turbine Wheel Holding Fixture.
TA708031
C-3
|
