TM 10-3930-659-34 5-16.    REAR  AXLE  FRONT  OSCILLATING  SUPP  3RT  YOKE,  INPUT  QUILL,  AND  PINION  SHAFT  MAINTENANCE (Con’t). 5 Using puller kit, remove seal (14) from front input quill (11).  Discard seal. 6 Using puller kit, remove small seal (15) and large seal (18) from support (9).  Discard seals. 7 Remove retaining ring (17) from support (9). CAUTION Use care to prevent damage to support bore when removing bushing. 8 If  damaged,  remove  bushing  (16)  from  support (9). NOTE Bearing cone will remain with pinion shaft when removed. 9 Using arbor press, press pinion shaft (12) from front input quill (11) by pressing on threaded end of pinion shaft. 10 .Using arbor press, press bearing cone (19) from front input quill (11). NOTE Number of shims may vary.  Note number of shims to aid during assembly. 11 Remove washer (22) and shim pack (23) from pinion shaft (12). TA708365 5-154