TM 10-3930-659-34 5-15.  FRONT AXLE YOKE, INPUT QUILL, AND PINION SHAFT MAINTENANCE (Con’t). NOTE Steps (e) and (f) will seat bearing cone on pinion shaft. (e). Install  front  axle  yoke  (8),  spacer  (7),  and nut (6) on pinion shaft (10). (f). Secure  front  axle  yoke  (8)  in  machinist’s vise  or  axle  yoke  holding  tool  and  torque nut (6) to 445 Ib.-ft.  (603 N-m). (g). Remove nut (6), spacer (7), and front axle yoke (8) from pinion shaft (10). (h). Using arbor press, press pinion shaft (10) from   front   input   quill   (11)   and   remove bearing cone (13). (i). Install shim pack (16) and washer (15) on pinion shaft (10). (a). Using arbor press, press pinion shaft (10) into front input quill (11). (k). Using   arbor   press,   press   bearing   cone (13) on pinion shaft (10). 5-147