TM 10-3930-659-34 5-14.  AXLE HOUSING AND PLANETARY CARRIER ASSEMBLY REPAIR (Con’t). c.  CLEANING AND INSPECTION WARNING Dry  cleaning  solvent,   P-D-680,   is   toxic   and   flammable.      Always   wear   protective   goggles   and gloves, and use only in a well-ventilated area.  Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors.  DO NOT use near open flame or excessive heat.  The solvent’s flash point is 100°F-138°F (38°C-590C).  If you become dizzy while using cleaning solvent, immediately get fresh air and medical help. If solvent contacts eyes, immediately wash your eyes and get medical aid. 1. Clean metal parts with dry cleaning solvent and dry with a clean rag. 2. Inspect axle shaft for cracks, bends, and distortion.  Replace damaged axle shaft. 3. Inspect gear teeth for burrs, chips, and missing teeth.  Replace damaged gear. 4. Clean and inspect bearings in accordance with TM 9-214. d.  PLANETARY CARRIER ASSEMBLY 1. Install washer (28) and shouldered washer (27) in planetary carrier housing (29). 2. Apply petrolatum to 33 roller bearings (25) and install roller bearings on gear (24). 3. Install gear (24) and two plates (23) in planetary carrier housing (29) with shaft (26).  Ensure that groove in shaft is, toward long hub of planetary carrier housing. 4. Repeat steps 2 and 3 for other two gears (24). 5. Install retaining ring (30) on planetary carrier housing (29). 5-137