TM 10-3930-659-34 5-14.  AXLE HOUSING AND PLANETARY CARRIER ASSEMBLY REPAIR (Con’t). 6. Position axle housing (2) in vertical position, and install  axle  adjusting  tool  (11)  on  axle  housing with  two  %    in.    x  32  in.    bolts  (17)  and  %  in. nuts (16). 7. Attach suitable lifting device to axle adjusting tool (11)  and  raise  lifting  device  enough  to  support weight of axle housing (2). 8. Position  hydraulic  jack  on  axle  housing  (2)  with wood  blocks  between  bottom  of  hydraulic  jack and axle shaft (15). 9. Using  hydraulic  jack,  push  axle  shaft  (15)  away from axle housing (2).  Remove hydraulic jack. 10. Using  axle  adjusting  tool  (11),  lift  axle  housing (2) from axle shaft (15). 11. Remove   two   nuts   (16),   bolts   (17),   and   axle adjusting tool (11) from axle housing (2). 12. Using puller kit, remove outer seal (14), bearing cone  (13),  and  seal  (12)  from  axle  shaft  (15). Discard seals. 5-135