TM 10-3930-659-34 Section IV.  AXLE MAINTENANCE Paragraph Page Number Paragraph Title Number 5-14 Axle Housing and Planetary Carrier Assembly Repair..............................................5-133 5-15 Front Axle Yoke, Input Quill, and Pinion Shaft Maintenance.....................................5-142 5-16 Rear Axle Front Oscillating Support Yoke, Input Quill, and Pinion Shaft Maintenance .........................................................................................5-152 5-17 Differential Assembly Maintenance ...........................................................................5-164 5-14.  AXLE HOUSING AND PLANETARY CARRIER ASSEMBLY REPAIR. This Task Covers: a. Axle Housing Disassembly d. Planetary Carrier Assembly b. Planetary Carrier Disassembly e. Axle Housing Assembly c. Cleaning and Inspection INITIAL SETUP: Equipment Conditions: Materials/Parts: • Axle housing assembly removed (see para- • Silicone sealing compound (Item 17, Appendix B) graph 4-50) • Grease (Item 33, Appendix B) • Service brake disc removed (see paragraph 4-51) • Lead (Item 35, Appendix B) Tools/Test Equipment: • Petrolatum (Item 42, Appendix B) Tools/Test Equipment: • Rags (Item 43, Appendix B) • General mechanic's tool kit (Item 71, Appendix E) • Dry cleaning solvent (Item 47, Appendix B) • Outside caliper micrometer (Item 9, Appendix E) • Three seals • Feeler gage (Item 28, Appendix E) • Hydraulic jack, 10 ton (Item 39, Appendix E) Personnel Required:  Two • Torque wrench multiplier (Item 44, Appendix E) References: • Retaining ring pliers (Item 46, Appendix E) • Arbor press (Item 47, Appendix E) • TM 9-214 • Puller kit (Item 50, Appendix E) • Torque wrench, 0-600 Ib.-ft (Item 82, Appendix E) General Safety Instructions: • Axle adjusting tool (Figure C-9, Appendix C) • Dry cleaning solvent is flammable and must not be used near open flame Use only in a well-ventilated area. 5-133