TM 10-3930-659-34 5-13.  TRANSMISSION OUTPUT SHAFT ASSEMBLY REPLACEMENT (Con’t). C.   INSTALLATION NOTE Perform steps 1 through 3 only if pins were removed. 1. Install two new preformed packings (43 and 46) on pins (44 and 45). 2. Apply sealing compound to threads of two screws (41). 3. Install two pins (44 and 45) in transmission assembly (1) with two washers (42) and screws (41). 4. Install retaining ring (25) in transmission assembly (1). 5. If removed, install bearing (28) on output shaft (26) using arbor press. 6. Install pipe sleeve (27) on output shaft (26). TA708307 5-127