TM 10-3930-659-34 5-13. TRANSMISSION OUTPUT SHAFT ASSEMBLY REPLACEMENT (Con’t). 9. Remove output shaft (26) from transmission assembly (1). 10. Remove retaining ring (25) from transmission assembly (1). 11. Remove pipe sleeve (27) from output shaft (26). NOTE Perform steps 12 and 13 only if bearings are damaged. 12. Using arbor press, remove bearing (28) from output shaft (26). 13. Using puller kit, remove bearing (24) from transmission assembly (1). 14. Remove    two    caps    (30)    and    cap    (29)    from transmission assembly (1).  Discard caps. 15. If  plate  (32)  is  damaged,  remove  four  pins  (31) and    plate    from    transmission    assembly     (1). Discard pins. TA708304 5-124