TM 10-3930-659-34 5-12.  TRANSMISSION CLUTCH PACKS AND IDLER GEAR MAINTENANCE (Con’t). (h) If   damaged,   remove   two   seal   rings   (93 and  94)  from  piston   (92).      Discard   seal rings. (i) Repeat steps (e) though (h) for other side of first/forward gear disc carrier (36). (j) If damaged, remove two bearings (95 and 96) from first/forward gear disc carrier (36) using puller kit. c.  CLEANING AND INSPECTION WARNING Dry  cleaning  solvent,   P-D-680,   is   toxic   and   flammable.      Always   wear   protective   goggles   and gloves, and use only in a well-ventilated area.  Avoid contact with skin,  eyes, and clothes, and DO NOT breathe vapors.  DO NOT use near open flame or excessive heat.  The solvent’s flash point is 100°F-138°F (38°C-59°C).  If you become dizzy while using cleaning solvent, immediately get fresh air and medical help.  If solvent contacts eyes, immediately wash your eyes and get medical aid. 1. Clean all parts with dry cleaning solvent and dry with clean rags. 2. Inspect metal parts for cracks and breaks.  Replace damaged parts. 3. Clean and inspect bearings in accordance with TM 9-214. TA708281 5-100