| |
TM 10-3930-659-34
5-11. TRANSMISSION GEAR PUMP REPAIR.
This Task Covers:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Transmission oil feed flange removed (see para-
•
Rags (Item 43, Appendix B)
graph 5-10).
•
Dry cleaning solvent (Item 47, Appendix B)
•
One preformed packing
Tools/Test Equipment:
•
One seal
•
General mechanic's tool kit (Item 71, Appendix E)
General Safety Instructions:
•
Retaining ring pliers (Item 46, Appendix E)
•
Puller kit (Item 50, Appendix E)
•
Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
References:
area.
•
TM 9-214
a. DISASSEMBLY
1. Remove retaining ring (2) from output shaft (5).
2. Remove preformed packing (1) from bearing (3). Discard preformed packing.
3. Remove retaining ring (7) from output shaft (5).
4. Remove output shaft (5) from gear pump (4).
5. Using puller kit, remove bearing (3) from gear pump (4).
6. Remove bearing (6), key (8), and seal (9) from output shaft (5). Discard seal.
TA708272
5-88
|
