TM 10-3930-659-34 5-10.  TRANSMISSION OIL FEED FLANGE MAINTENANCE (Con’t). 2. Install  new  gasket  (7)  on  transmission  oil  feed flange (3). 3. Using   depth   gage   micrometer,   measure   and note distance from bearing (18) to gasket (7). 4. Subtract   measurement   taken   in   step   3   from measurement taken in step 1.  Difference is end play.    End  play  measurement  must  be  0.-0.020 in.        (0.-0.508    mm).        If    end    play    is    within specification, go to step 7. 5. Apply a light coat of petrolatum to shim (13) and install shim on gear pump (8). 6. Repeat steps 1 through 4. 7. Install  gear  pump  (8)  on  transmission  oil  feed flange  (3)  with  four  screws  (9)  and  two  screws (10 and 11).  Torque screws to 18 lb.-ft.  (24 N- m). 5-85