TM 10-3930-659-34 5-10.  TRANSMISSION OIL FEED FLANGE MAINTENANCE (Con’t). a.   REMOVAL NOTE Use four screws removed from bearing cover to perform step 1. 1. Install two transmission oil supply flange removal brackets   (4)   on   oil   feed   flange   (3)   with   four screws (2). 2. Install  four  screws  (1)  on  two  transmission  oil supply flange removal brackets (4). 3. Slowly  and  evenly  turn  four  2  in.    X  3  in.    x  13 screws   (1),   and   remove   transmission   oil   feed flange (3) from transmission assembly (5). 4. Remove  four  screws  (1),  screws  (2),  and  two transmission  oil  supply  flange  removal  brackets (4) from transmission oil feed flange (3). 5. Remove gasket (6) from transmission assembly (5).  Discard gasket. 5-80