TM 10-3930-659-34 5-5. CAMSHAFT REPLACEMENT (Con’t). c.           INSTALLATION 1. Install new woodruff key (8) on camshaft (7). 2. Install camshaft gear (6) on camshaft (7) with timing mark (9) facing away from camshaft until camshaft gear is flush with camshaft shoulder. CAUTION DO   NOT   allow   camshaft   lobes   to   drag   on   bearing   surfaces   in   engine   block   while   installing camshaft.  Failure to follow this warning may result in damage to bearing bore. 3. Apply a light coat of lubricating oil to camshaft (7). 4. Install thrust plate (4) and camshaft (7) on engine block (1) with two screws (5).  Torque screws to 35 lb.-ft.  (47 Nom). 5-50