TM 10-3930-659-34 5-4. ENGINE MAIN BEARINGS, THRUST BEARING, AND CRANKSHAFT REPLACEMENT (Con’t). 11. Install two washers (3) and screws (4) on main bearing cap (2) and engine block (5). 12. Repeat steps 8 through 11 for remaining main bearing caps (2) and thrust bearing cap. 13. Using hammer and wood block, tap crankshaft (9) to rear  of  engine  block  (5).    Aline  front  flanges  of  upper  and lower main and thrust bearings. 14. Using hammer and wood block, tap crankshaft (9) to front  of  engine  block  (5).    Aline  rear  flanges  of  upper  and lower main and thrust bearings. 15. Torque screws (4) to 85 lb.-ft.  (115 N.m). FOLLOW-ON TASKS: · Install flywheel housing (see paragraph 4-10). · Install pistons and connecting rods (see paragraph 5-3). · Install cylinder block front plate (see paragraph 5-6). 5-45