TM 10-3930-659-34 5-1. ENGINE BLOCK MAINTENANCE (Con’t). d. ASSEMBLY 1. Install new preformed packing (13) in engine block (1) oil port tube. 2. If removed, install four dowel pins (3), two dowels (12), and bushing (11) in engine block (1). 3. If removed, install plug (10), stud (9), and pipe plugs (2, 7, and 8) in engine block (1). 4. Install drain plug (6) in engine block (1). 5. Install new preformed packing (4) and plug (5) on engine block (1). FOLLOW-ON TASKS: • Install camshaft (see paragraph 5-5). • Install crankshaft (see paragraph 5-4). • Install cylinder liners (see paragraph 5-2). • Install flywheel housing (see paragraph 4-10). TA708126 • Install engine oil cooler (see paragraph 4-16). • Install oil filter bypass valve (see paragraph 5-7). • Install engine oil level gage tube (see TM 10-3930-659-20). • Install alternator bracket (see TM 10-3930-659-20). • Install fuel transfer pump (see TM 10-3930-659-20). 5-11