TM 10-3930-659-34 4-71. FORK SPACING CYLINDER REPAIR (Con’t). c. ASSEMBLY 1. Using arbor press, press bushing (1) in barrel (2). 2. Using arbor press, press bushing (11) in rod (12). NOTE Buffer seals should be stacked one above the other. 3. Install two new buffer seals (5) on guide (6). 4. Install new seal (7) in guide (6). 5. Install new filler ring (8) in guide (6) with lip of filler ring facing upward. 6. Install new preformed packing (9) and backup ring (10) on guide (6). 7. Install guide (6) and piston (4) on rod (12) with new locknut (3).  Torque locknut to 37 lb.-ft.  (50 Nom).  Tighten locknut one-half turn. 8. Apply a coat of grease to outer surface of rod (12), guide (6), and piston (4). 9. Install rod (12) in barrel (2) and push piston (4) in barrel. 10. Push guide (6) in barrel (2) and install retaining ring (13). 11. Pull rod (12) and guide (6) outward from barrel (2), and install two new wiper seals (14) and retaining ring (15). FOLLOW-ON TASKS: • Install fork spacing cylinder (see TM 10-3930-659-20). TA708436 4-296