TM 10-3930-659-34 4-65. FORK/BRAKE HYDRAULIC PUMP REPAIR (Con’t). NOTE Perform steps 14 and 15 only if compensator was disassembled. 14. Install spool (2) and plug (1) in compensator (4). 15. Install  spring  seat  (5),  spring  (6),  new  preformed  packing  (7),  adjusting  screw  (8),  and  new  locknut  (9)  on compensator (4).  Torque locknut to 168 lb.-in.  (19 Norm). 16. Install new gasket (21), new preformed packing (22), and compensator (4) on end cap (18) with four screws (3). Torque screws to 62 lb.-in.  (7 Nom). FOLLOW-ON TASKS: • Install fork/brake hydraulic pump (see TM 10-3930-659-20). • Perform fork/brake hydraulic pump standby pressure test (only if compensator was disassembled) (see TM 10- 3930-659-20). 4-267