TM 10-3930-659-34 4-65. FORK/BRAKE HYDRAULIC PUMP REPAIR (Con’t). 11. Install cylinder (13), new preformed packing (11), adjustment screw (12), and cap (20) on end cap (18). 12. If removed, install bearing (I5) and three pins (10 and 16) on end cap (18).  Bearing must extend 0.088-0.098 in. (2.235-2.489 mm) from surface of end cap. 13. Install new gasket (17) and end cap (18) on fork/brake hydraulic pump housing (14) with four screws (19).  Torque screws to 40 lb.-ft.  (54 N.m). 4-266