TM 10-3930-659-34 4-65. FORK/BRAKE HYDRAULIC PUMP REPAIR (Con’t). 7. Remove valve plate (23) from fork/brake hydraulic pump housing (14). 8. Using arbor press, compress spring (26) and remove retaining ring (24), two washers (25), and spring. 9. Remove cylinder block (27), washer (29), guide (30), retainer (32), and plate (33) from fork/brake hydraulic pump housing (14). 10. Remove three pins (28) and nine pistons (31) from cylinder block (27). 11. Remove  retaining  ring  (40),  seal  retainer  (39),  seal  (38),  and  drive  shaft  (47)  from  fork/brake  hydraulic  pump housing (14).  Discard seal. 12. Remove retaining ring (45) and bearing (46) from drive shaft (47). 13. Mark two trunnions (43) to aid during assembly. 14. Remove six screws (44), two trunnions (43), preformed packings (42), and bearings (41) from fork/brake hydraulic pump housing (14).  Discard preformed packings. 4-264